Geneero has two posts – The X-Post (XP) and the Tab Post (TP but shown above as TSP)
The X-Post (XP) is a 76 x76mm section that can accept the slide-in range of plates profiled above and described below.
The Tab Support Post (TSP) is a 76 x76mm section that can accept the Tab (TAB but shown above as PST) element in a groove centered in each of the four faces. There is a half tab component (PSHT) for inserting a tab connection between fixed tabs already in place.
The X-Post (XP) Plates
XPL – this is a blank plate that could be used as the front panel for electronic and electrical switching etc with cables hidden in the X-Post hollow sections or used by itself to give the post an attractive appearance.
XCCP – This plate couples up with the Click Exhibition System jaw enabling all Click profiles to be connected.
XOCP – This plate couples up with the original (basic) Octonorm jaw connection
XBP – This plate captures the head of an M8 Bolt so that any heavy item can be secured to the post.
XTP – This is the Tab Plate and accepts the Geneero Tab or two Half Tabs to which a multitude of materials can be affixed. The Tabs can be cut on an angle for supports to porches, cantilevered roofs etc. They can also connect with the Universal Shelf Support to frame a structure (see Other Options). The raw TAB profile can be seen in the photo on the About Geneero page
This plate can also be reversed when slid into the post creating a pivot socket for a wide range of applications.
The Tab Support Post (TSP)
This is a simple yet very strong construction post that uses the TAB profile or the Half Tab profile to make connections with other profiles and other materials. Examples of this are shown on other pages, both in framing applicationa as well as in complete buildings.
Other Uprights
OUL Eight-way upright
General purpose structural post with eight channels. Can be joined in its length with JS Spigot.
Important Note: The OUL channel will not accept pre-1992 versions of LF, CN, FP and EHP (current versions, with a tapered section, will fit). GT6 glazing track cannot be used with OUL. Use PAGT6 insted.
DU Double Upright
Structural post with two system channels, and side channels for rails. An economic general-purpose upright, with minmal visible metal on the front face.
NU Intermediate Upright
Designed principally for vertical sub-division of free-standing glazed or panelled structures; but can also be used as a general-purpose 3-way post. Can be fixed at 90° to any Click channel with the NUJ joint.
QS Quadrant Section
The basis of a comprehensive system for showcases, counters and small cabinets. Used with the 3-way QJA joint, it forms a symmetrical frame which can be glazed or pannelled. Can also be used as a 90° corner post in conjunction with cross-rails.
Call us on 01386 430 121 and be connected with a Geneero Specialist.
Registered Designs and Patents applied for