Geneero have just two profiles that work perfectly to create covers and cases for a wide range of collectable items from models to, well almost anything that you what to keep clean and dust-free.
The frame (which is all that we supply, not the plastic) consists of a simple 90 degree corner and a base rail that incorporates a hair pile liner to protect the furniture on which the case/cover is placed. Five perspex or clear uPVC panels create the case/cover with eight 3mm machine head screws holding the panels together.
We do not normally supply the clear panels as these can be obtained locally in most areas. We can make a case/cover to special order and, of course, these are sent packed flat which is a huge benefit over glued-up acrylic cases that are hard to ship (you are shipping air) and which often crack in transit.
Further examples in use
Further examples in use
Ordering the aluminium extrusions for the cases is not difficult – all the we need is the length of the case. From us you will get 2 corner profiles and 2 base profiles with the flock insert fitted, plus 10 x 3mm machine head screws (2 more than you need), two 3mm allen keys (in case you lose one) and details on where to drill the holes in the end plates for the screws to hold the case together. You do not have to drill or cut the metal – you use it as it comes.
The case parts (less the plastic) cost as follows:
Up to 300mm – £12.95 + Shipping and handling £4.95
301mm – 600mm – £18.95 + Shipping and handling £6.95
601mm – 900mm – £24.95 + Shipping and handling £7.95
901mm – 1200mm – £29.95 + Shipping and handling £9.95
Material is cut and packed after noon every Tuesday and shipped the next day (every Wednesday). Call 0800 316 6390 payment by Credit Card or PayPal accepted. Orders placed after noon on Tuesdays will be cut and shipped on the Wednesday seven days later.
Call us on 01386 430 121 and be connected with a Geneero Specialist.
Registered Designs and Patents applied for